Filter
Top Products
62
EN
Changing the Menu Settings (Continued)
Menus Settings: [ ] = Factory-preset
RECORD BUTTON
Enables the recording button [REC]
on the LCD monitor.
OFF : Deactivates the function.
[ON] : Activates the function.
QUICK RESTART
Enables the camcorder to start
up quickly when you turn off the
camcorder and then on again within
5 minutes by closing and opening
the LCD monitor.
OFF : Deactivates the function.
[ON] : If the LCD monitor is opened again within 5 minutes,
the camcorder starts quickly. The power consumption
used for the 5 minute period after the LCD monitor is
closed is approximately 1/3 that used during recording.
This enables you to save more power than leaving the
power on.
DROP DETECTION
Prevents damage to the HDD by
turning off the power automatically
when it is detected that the
camcorder dropped.
OFF : Deactivates the function.
[ON] : Activates the function.
To turn on the camcorder when the drop detection
worked, close the LCD monitor and open it again.
NOTE
•
The built-in hard disk of the camcorder may not be protected
even if the setting is [ON].
•
When recording/playback stops even if the camcorder is not
dropped, set the setting to [OFF] or set [REC MEDIA FOR
VIDEO] to [SD]. (੬ p. 64)
REMOTE
Turns on/off reception of the
operation signal from the remote
control.
OFF : Does not receive the signal from the remote control.
[ON] : Enables operation with the remote control.
UPDATE
Updates and improves the system
software.
YES : Performs this function.
[NO] : Cancels this function.
NOTE
Information about obtaining system update will be made
available on the JVC’s web site.
FACTORY PRESET
Returns all the camcorder settings to
their default values.
YES : Performs this function.
[NO] : Returns to the menu screen without executing reset.