Filter
Top Products
18
Setting the PC’s IP Address for Windows XP (continued)
3.
Select [Internet Protocol (TCP/IP)] and click [Properties].
4.
Select [Use the following IP address] to set [IP Address] and [Subnet Mask] and then click
.
Select [Internet Protocol (TCP/IP)].
5.
Click in [Local Area Connection Properties].
Click [Properties].
Click
.
Select [Use the following IP address].
Set [IP Address] to “192.168.0.3.”
Note
● Before changing the IP address,
note down the original address.
● Do not use the same IP address
elsewhere in this network environ-
ment.
Set [Subnet Mask] to an appropriate value
according to the operating environment.
Ask the network administrator if necessary.
Preparations (Step 2 Setting the Network)
VN-C10_E_01-24.pm6e 03.4.24, 10:03 AM18