Filter
Top Products
34
Procedure
1. In the menu bar, click [V.Networks] - [Position Memory].
2. Select the V.NETWORKS for which you want to change the position
memory.
* The current registration information is displayed in the [PAN/TILT/ZOOM]
field.
3. Operate the panning, tilting and zooming to set the conditions you want
to register.
4. In the position memory bank from 1 to 10 (from 1 to 6 with the VN-C2U),
click the [Memory] button with the memory number you want to use.
Now the position memory setting is complete.
SETTING THE POSITION MEMORY
This function changes the setting of the position memory for panning,
tilting(VN-C2U
•
VN-C3U) and zooming (VN-C3U only).