Filter
Top Products
12
Adjusting Zoom and Focus
Ÿ Loosen the zoom lever (D) / locking screw by turning it counter-clockwise.
Ÿ Rotate the zoom ring to achieve the desired picture.
Ÿ Loosen the focus lever (E) / locking screw by turning it counter-clockwise.
Ÿ Rotate the focus ring to adjust the focus.
Ÿ If re-adjustment is necessary, repeat the steps above.
Ÿ Retighten the zoom lever( D) / locking screw and the focus lever (E) / locking
screw.
Caution Retighten the locking screws to prevent loss of adjustment.
Mounting the Camera
Ÿ Place the mounting template (supplied) on the mounting surface and mark the
holes.
Ÿ Drill two holes, and then insert the screw anchors into the holes.
Ÿ Take off the camera housing.
Ÿ Connect the Safety Wire (fall prevention wire, not supplied) to the ceiling.
A
E
C
D
B