Filter
Top Products
38
Figure 4-28 Audio Input
Audio Output
Ÿ Audio Output: Set to "ON" when delivering audio to a speaker connected to
the camera,
Ÿ Audio Output Level: Select among High, Mid and Low
Figure 4-29 Audio Output
Note: Audio Input/Output can have some noise and delay.
Note
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and options
as defaults.
Network Settings
Basic
Basic
Figure 4-30 Network basic
Network
Ÿ IP Address: Input your IP address here when you select “Manual”.
Ÿ Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask
is not properly configured, the camera may not be able to communicate with other
devices on the network.