Filter
Top Products
46 www.kodak.com/go/support
Troubleshooting
Ready light blinks red
and camera turns off.
Batteries are low or
exhausted.
Install new batteries (page 1) or
charge rechargeable batteries.
Ready light glows
steady red.
Camera’s internal
memory or card is full.
Transfer pictures to the computer
(page 14), delete pictures from the
camera (page 12), switch image
storage locations (page 25), or insert
a card with available memory
(page 3).
Camera processing
memory is full.
Wait. Resume picture taking when
the light turns green.
Card is read-only. Change the image storage location
to internal memory (page 25), or use
a different card.
Ready light glows
steady green.
Camera is on; ready to
take a picture or video.
Camera is operating normally.
Status Cause Solution