Filter
Top Products
Choosing the Right Chemicals for Your Minilab • J-36 7
KODAK CHEMICALS FOR YOUR FILM
PROCESSOR
KODAK FLEXICOLOR Chemicals are supplied as
all-liquid concentrates for easy mixing. They are available in
sizes that are economical and convenient for minilabs. For
more information on processing with these chemicals, visit
www.kodak.com/go/photochemicals.
KODAK FLEXICOLOR Developer Replenisher LORR
This developer has low replenishment rates that help reduce
developer effluent discharge by as much as 50 percent.
Lower replenishment rates mean less chemical mixing and
lower cost per roll of film processed. Use only
FLEXICOLOR Developer Starter LORR to prepare a fresh
tank solution with FLEXICOLOR Developer Replenisher
LORR.
Available in sizes to make 5 and 10 litres and 25 U.S. gallons
(two 12.5-gallon sizes).
KODAK FLEXICOLOR Developer Starter LORR
Use this starter to prepare a fresh tank solution from
FLEXICOLOR Developer Replenisher LORR.
Available in a size to prepare 8.3 U.S. gallons of developer
tank solution from developer replenisher.
KODAK FLEXICOLOR Bleach III NR Replenisher
For use in minilabs using Process C-41B or C-41, this bleach
offers reduced cost per roll of film and reduced
replenishment rates and volume of effluent discharged. It
requires no mixing; it is packaged ready to use. Use
FLEXICOLOR Bleach Starter to prepare a fresh tank
solution.
Available in a 5-litre size.
KODAK FLEXICOLOR RA Bleach Replenisher NR
This bleach is designed for use in minilabs that use Process
C-41RA. It requires no mixing; it is packaged ready to use.
This bleach is also odorless. Use FLEXICOLOR Bleach
Starter to prepare a fresh tank solution.
Available in a 5-litre size.
KODAK FLEXICOLOR Bleach Starter
Use this starter to prepare a bleach tank solution with
FLEXICOLOR Bleach III NR Replenisher or
FLEXICOLOR RA Bleach Replenisher NR. This product is
odorless, non-corrosive, and non-foaming for easy use.
Available as a 1-gallon concentrate to make 20 U.S. gallons
of Bleach III NR tank solution or 8.3 U.S. gallons of RA
Bleach NR tank solution.
KODAK FLEXICOLOR Fixer and Replenisher
Use this fixer for Process C-41 or C-41B.
Available in sizes to make 5 litres and 5 and 25 U.S. gallons.
KODAK FLEXICOLOR RA Fixer and Replenisher
This fixer is designed for use in minilabs that use Process
C-41RA.
Available in sizes to make 5 and 10 litres.
KODAK FLEXICOLOR Final Rinse and Replenisher
This final rinse is designed with state-of-the-art surfactants
to reduce deposits and drying marks on processed color
negative films. It also reduces the potential for biological
growth in the mixed solution. This means less maintenance
and less frequent dumping of working tanks. Because the
new final rinse contains no stabilizing agent, labs will not
need to provide formaldehyde training or do the associated
record keeping required by OSHA guidelines. You can use
the final rinse in minilabs that operate with a wash or a
washless cycle.
Note: Do not process films of older design that require a
stabilizing agent for image stability. These films are
KODAK VERICOLOR III Film, VERICOLOR Slide
Film / SO-279/5072, and VERICOLOR Print Film 4111.
Process these films only in a processor that uses
FLEXICOLOR Stabilizer III and Replenisher. Films of more
recent design, such as KODAK GOLD, MAX, ROYAL
GOLD, PROFESSIONAL PORTRA, PROFESSIONAL
EKTAPRESS, and PROFESSIONAL SUPRA Films require
no stabilization for image stability. They will have optimum
image-stability performance when processed with
FLEXICOLOR Final Rinse and Replenisher.
Available in sizes to make 5 and 10 litres and 12.5 and
75 U.S. gallons.
KODAK CHEMICALS FOR YOUR PAPER
PROCESSOR
These chemicals are supplied as all-liquid concentrates for
easy mixing and handling. They are available in sizes that are
convenient and economical for minilabs.
KODAK EKTACOLOR PRIME SP Developer
Replenisher
This new developer replenisher is designed for minilabs with
average to high utilization. Supplied as a single-part
concentrate, it offers easy and convenient mixing.
Replenishment rates are significantly lower than those of
EKTACOLOR PRIME Developer Replenisher.
Available in sizes to prepare 10 litres and 20 gallons (two
10-gallon mixes) of replenisher solution.
Note: EKTACOLOR PRIME SP Developer Replenisher
will replace EKTACOLOR PRIME Developer Replenisher,
EKTACOLOR PRIME Developer Replenisher LORR, and
EKTACOLOR PRIME Developer Regenerator. The
discontinuance of these three products will occur at different
times in different regions.
KODAK EKTACOLOR PRIME Developer Replenisher
If new EKTACOLOR PRIME SP Developer Replenisher is
not yet available in your region, use this developer if your
minilab processor has a developer tank turnover every
four weeks (or more frequently).
Available in sizes to prepare 10 litres and 25 gallons (two
12.5-gallon mixes) of solution.