Filter
Top Products
SETTING UP THE SHOOTING FUNCTION
PC Mode :
To download the images from camera to PC
When the camera is connected to PC successfully you will be heard the beep sound (beep-)
Note
After you have selected and set the required functions, press the "MENU/ ENTER" button to
save these, before quitting each menu mode.
About the issue that AVI file downloaded from your camera can’t play back on Window please
refer to below solution.
- Please install "QuickTime" software in your PC
( "QuickTime" is a trademark of Apple Computer, Inc.)
- Please install the DirectX8.0 in your PC. Driver is served from camera driver or Microsoft
homepage.
User must login as an Administrator or own the Administrator privilege to install DirectX 8.0a
Runtime under Windows 2000.
Or the DirectX Setup will show the below message and can not install completely. Current
logon user doesn’t have the Administrator privilege. Please logon again as an Administrator or
contact your PC Administrator.
When you press the shutter button in the Set Up menu on the LCD monitor, the camera will not
take a picture.
Please ensure that you press the "MENU/ ENTER" button to save the function you have
selected.
The PC connection function will only operate after you have turned the Mode dial to PC Mode.
Even if the camera is connected to the PC via USB, unless PC Mode has been selected, the
function will not operate.
After the camera is connected to PC, the TFT LCD will be turned off automatically.
But the camera will not turned off until the camera is disconnected from PC.