Filter
Top Products
18
Chapter 2
Selecting Modes and Settings in PAS Mode
1 Turn the Mode dial to PAS.
Liveview turns on and the PAS mode
options appear on the camera screen.
2 The PAS mode setting is selected
(highlighted in yellow). Move the joystick
to change the setting:
P— Program (default). You can set
exposure compensation.
A—Aperture priority. You can set
aperture and exposure compensation.
S—Shutter priority. You can set shutter
speed and exposure compensation.
To check current settings, press the Shutter
button half way.
If an option is marked with red, it is out
of range and may cause unacceptable
image/print quality. Adjust the setting up
or down until it turns white.
3 Move the joystick to select the option you wish to change. Then move
the joystick to change the setting. See page 19 for option
descriptions.
In each PAS mode, you can change only the options that are highlighted
in white. Unavailable options are grey.
4 Press the Menu button to change other settings. See this Chapter (2) for
details.
OFF
A
U
T
O
P
A
S
OFF
A
U
T
O
P
A
S
shar
e
dele
t
PAS mode
Aperture
Shutter speed
Exposure compensation
Out of range