Filter
Top Products
Taking pictures and videos
www.kodak.com/go/support
23
Using an external flash unit
Use an external flash unit when you want additional or specialized lighting.
You can use the camera’s built-in flash, as well, to provide extra fill flash.
1 Turn off the camera and flash unit.
2 Open the External-flash-connector cover.
3 Plug your external-flash-unit cable into the
External flash connector on the camera.
The external flash unit is live when connected to
the camera. The flash synchronizes at any shutter
speed. Refer to your external flash unit user’s
guide for details.
NOTE: The connector accepts all standard external flash
cables, maximum 500 volts.
Shooting close-up and landscape pictures
Use the Close-up/Landscape button to take pictures of scenes that are
very close or very far away. (Not available in Scene modes.)
1 Set the Mode dial to any Capture mode.
2 Press the Close-up/Landscape button
repeatedly until the or icon appears
in the status bar.
3 Take a picture.
External-flash-
connector cover
External flash
connector
Close-up/Landscape