Filter
Top Products
Troubleshooting
www.kodak.com/go/support
55
Flash does not fire ■ Open the flash unit (page 20).
■ Check the flash setting and change as needed (page 20).
Storage location is
almost or entirely full
■ Transfer pictures to the computer (page 51).
■ Delete pictures from the card or insert a new one (page 7).
■ Change image storage location to internal memory
(page 29).
Battery life is short
■ Wipe the contacts with a clean, dry cloth (page 64) before
inserting a battery in the camera.
■ Insert a charged battery (page 2).
You cannot take a
picture
■ Turn the camera off, then on again.
■ Depress shutter button all the way (page 8).
■ Insert a charged battery (page 2).
■ Wait until the AF/AE indicator turns green before attempting
to take another picture.
■ Memory full. Transfer pictures to the computer (page 51),
delete pictures from the camera (page 39) or card, change
image storage location, or insert a new card.
Error message
appears on EVF/LCD
screen
■ Turn the camera off.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry
cloth (page 64).
■ Reinstall the battery.
■ Turn on the camera.
■ If all else fails, get customer support help (see page 60).
Memory card not
recognized or camera
freezes with card.
■ Card may be corrupted. Format card in camera (see page 7).
■ Use another memory card.
If... Try one or more of the following