GE1900 User Manual
70-0028A-A
Prosilica Inc.
2
Specifications
Sensor Type Kodak KAI-2093M (KAI-2093CM for color)
Sensor Shutter Type Progressive Interline
Image Resolution 1920 x 1080 pixels
Pixel Size 7.4µm x 7.4µm
Optical Format 1 inch
Lens Mount C-mount with adjustable back focus
Color Sensor Filter Pattern
†
Bayer
Full Resolution Frame Rate 30.6 fps
Frame Rate (640 x 480 ROI) 50 fps
I/O 1 isolated TTL compatible input, 3 isolated TTL
compatible outputs
Power Requirements Less than 5.0W
††
Digitization 12 Bits
Trigger latency 5µs
Trigger Jitter ±10ns
Operating Temperature 0 to 50 Celsius***
Operating Humidity 20 to 80% non-condensing
Size 39mm (height) x 51mm (width) x 80mm (length)
Weight 169g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulatory Conforms to CE, FCC
† Applies to GE1900C only.
†† Power consumption will increase with reduced ROI imaging, vertical binning, and color formats.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GE CAMERAS, SPECIAL
CARE IS REQUIRED TO MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE
CAMERA IS TO BE OPERATED IN A WARM ENVIRONMENT, IT IS SUGGESTED THAT THE
CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET AND THAT
THERE IS SUFFICIENT AIR FLOW.
