Filter
Top Products
GE1900 User Manual
70-0028A-A
Prosilica Inc.
14
o Select the Internet Protocol (TCP/IP) check box and then select Properties. See Figure 6.
Network card TCP/IP address.. Select the Use the following IP address and enter an IP
address of 169. 254. x. y, where x and y can be any number. Press the TAB key after entering
the IP address and the subnet mask will automatically be entered. The subnet mask is 255.
255. 0. 0. Click OK to save changes. Note that if Windows reports a conflict with the above
IP address, simply repeat the above steps and change the last digit of the IP address to a
different value.
Figure 6. Network card TCP/IP address.