Filter
Top Products
12
Viewing Pictures on a COMPACTFLASH
Card
1 Insert a COMPACTFLASH Card into the Smart Picture Frame. (See
“Inserting a COMPACTFLASH Card” on page 8.)
The frame displays the last picture on the card-typically the most
recent picture taken. Then, the frame scrolls through pictures stored
on the frame followed by pictures from the card.
2 Use the arrow buttons to scroll through your pictures, or view them as a
part of the slide show. (See “Slide Show Mode” on page 13.)
NOTE: If the pictures on the card were captured at a resolution higher
than that of the frame (larger than 640 x 480 pixels), it may take some
time to scale each picture.
Set COMPACTFLASH Card Icon Display
A small CF symbol in the lower right corner indicates that the current picture
resides on a card (not in the frame memory). To enable or disable the display
this icon:
1 Press the Menu button.
2 Select Advanced, then press OK.
3 Select Set CF Icon Display, then press OK.
4 Use the arrow buttons to select either:
m Yes (the CF icon will appear when the frame displays pictures from a
card)
m No (the CF icon will not appear)
When finished, press OK.
5 Accept or re-enter the settings. When finished, press OK.
SmartPictureFrameNon-Networked.book Page 12 Tuesday, October 9, 2001 4:36 PM