Filter
Top Products
www.kodak.com/go/support 31
4 Changing settings and more
Changing frame settings
The options in the Settings menu let you customize and configure your frame.
IMPORTANT:
You may need to keep tapping the up/down arrows to see the complete list
of available options.
1 Tap (Menu), then tap (Settings).
2 Tap the up/down arrows to highlight a setting, then tap OK.
3 Follow the on-screen instructions. Tap OK to accept your selections.
4 Tap (Play) to return to playback from the current image. Tap (Menu) to
return to the top level menu.
Settings menus
Setting Options
Upgrade Firmware
This setting is only available if
the upgrade file (.img) is
present on the frame (on an
inserted memory card or flash
drive, or copied into internal
memory).
Install now—load the latest version of firmware on your
frame (page 35).
Exit—return to the main menu.
Duration
Specify how long each picture
is displayed.
3 seconds to 1 hour. The default is 5 seconds.
NOTE: When Transition is set to Zoom & pan, the Duration is
always 10 seconds.