Filter
Top Products
Troubleshooting
www.kodak.com/go/support
47
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■ Transfer the picture to the computer (see page 43), then format the
card or internal memory (see page 35).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Slide show does
not run on external
video device.
■ Adjust the camera Video Out setting (NTSC or PAL, see page 35).
■ See the external device’s user’s guide.
Picture is too light.
■ Add more distance between the camera and the subject.
■ Decrease Exposure Compensation (see page 36).
Picture is not clear.
■ Clean the lens (see page 57).
■ Make sure your camera is not in Close-up mode.
■ Press the shutter button halfway to focus and set exposure. When the
framing marks turn green, press the Shutter button completely down.
■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
■ Turn on the flash (see page 10).
■ Move within flash range (see page 10).
■ Use Fill flash (see page 10) or change your position so light is not
behind the subject.
■ Increase Exposure Compensation (see page 36).
Camera does not
recognize
SD/SDHC card.
■ Purchase a certified SD/SDHC card.
■ Format the card (see page 35).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Insert a card into the slot, then push to seat (see page 4).
Camera freezes up
when a card is
inserted or
removed.
■ Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
If Try one or more of the following