Filter
Top Products
48 www.kodak.com/go/support
Troubleshooting
Camera/computer communications
LCD messages
Memory card full.
■ Insert a new card (see page 4), transfer pictures to the computer (see
page 43), or delete pictures (see page 17).
Memory card and
internal memory
full.
■ Transfer pictures to the computer (see page 43), then format the card
or internal memory (see page 35).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
If Try one or more of the following
The computer does
not communicate
with the camera.
■ Turn on the camera (see page 3).
■ Install new batteries (see page 1) or charge rechargeable batteries.
■ Connect cable to camera and computer port (see page 43).
■ Install the software (see page 42).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (see page 42).
■ Disconnect camera from the computer. Close all software applications,
reconnect camera.
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
■ Disconnect USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see page 42).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (see page 42).
If Try one or more of the following
No images to display
■ Change image storage location setting (see page 33).
If Try one or more of the following