Kodak ZE1 Camcorder User Manual


 
Appendix
www.kodak.com/go/support
18
Use only batteries approved for this product to avoid risk of explosion.
Keep batteries out of the reach of children.
Do not disassemble or expose batteries to liquid, moisture, fire, or extreme
temperature.
In the unlikely event that battery fluid leaks inside the product, contact Kodak
customer support.
In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
Go to www.kodak.com/go/reach for information about the presence of substances
included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).
Dispose of batteries according to local and national regulations. Go to
www.kodak.com/go/kes.
For more information, go to www.kodak.com/go/batteries.
Care and maintenance
Before inserting or removing the card, make sure your hands, the camera, and the
card are completely dry.
If water has entered the camera, allow all components to air-dry for at least 24
hours before using the camera.
Do not subject the camera to temperatures lower than 0 (32° F) or higher than
40
° C (104° F) for an extended time. Wait until camera reaches operating
temperatures before using.
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.