Filter
Top Products
5554
3.Press the shutter-release button all the way
down to begin the countdown.
• The self-timer indicator will blink on the data panel.
The self-timer lamp on the front of the camera will
blink slowly during the countdown, then rapidly just
before the shutter is released.
• To cancel the self-timer, press the drive-mode button again or turn the camera
off.
• Self-timer is automatically canceled after the shutter is released.
SELF-TIMER
In this mode, the camera continuously takes pictures as
long as the shutter-release button is held down. The
camera will take one picture every 2.2 seconds. When
the flash is used, the rate may be slower because the
flash must recharge between frames.
1.Press the drive-mode button until the
continuous-advance indicator appears on
the data panel.
Continued on next page.
ADVANCED OPERATION
CONTINUOUS ADVANCE (160 MODEL)