Filter
Top Products
6766
FOR OWNERS OF THE QUARTZ-DATE MODEL
• To save power, the camera automatically shuts down if the shutter is not
released in approximately 8 minutes.
• Under fluorescent or extremely bright lighting, or with backlit subjects, the
remote control may not operate or the effective distance may be reduced.
• The remote control mode will remain in effect after the picture has been taken.
Press the drive-mode button to reset the drive mode, or turn the camera off.
FOCUS LOCK IN REMOTE CONTROL MODE
Continued on next page.
1. Select remote-control mode using the
drive-mode button.
2.Place the subject in the focus frames and press the shutter-
release button partway down to confirm the focus; the green
focus lamp will glow and remain lit.
• It the focus lamp does not remain lit after pressing the shutter-release button
partway down, the focus was not locked. Repeat the procedure.
• To cancel the focus lock, press the shutter-release button partway down again
or press the zoom lever.
Focus lock can be used in Area AF or spot AF.
ADVANCED OPERATION