Filter
Top Products
DISCONNECTING THE CAMERA FROM THE COMPUTER
102
DATA-TRANSFER MODE
WINDOWS ME AND WINDOWS 2000 PROFESSIONAL
Confirm that the ‘access lamp’ is not lit. Turn the mode dial to another position and then disconnect
the USB cable.
Never disconnect the camera when the access lamp is lit – the data or
CompactFlash card may permanently be damaged.
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
WINDOWS 98 AND 98SE
When more than one external device is connected to the computer, the unplug-or-
eject-hardware window can be used. To disconnect the camera, double click on the
unplug-or-eject-hardware icon located on the task bar to activate the window.
Click on the small window to
stop the device. The safe-to-
remove-hardware window will
appear. Click “OK.” Turn the
mode dial to another position
and then disconnect the USB
cable.