Filter
Top Products
17
BATTERY CONDITION INDICATOR
Full-battery Icon – the batteries are fully charged. This icon is displayed
for five seconds on the monitor when the camera is turned on. The icon
remains on the data panel.
Blinking low battery icon – when displayed on the data panel with no
other icons, power is insufficient for camera operation. The shutter will
not release. Replace the batteries immediately.
Low battery warning – battery power is very lowl. The batteries should
be replaced as soon as possible. This warning automatically appears
and remains on the monitor until the batteries are changed.
AUTO POWER SAVE
To conserve battery power, the camera will turn off displays and unnecessary functions if an
operation is not made within a certain period. The LCD monitor will turn off after thirty seconds. The
data panel turns off after one minute. To restore the displays, press the menu, quick view, display
button, or controller, or turn the mode dial to another position. The length of the auto-power-save
period for the data panel can be changed in the Basic section of the setup menu (p. 84).
This camera is equipped with an automatic battery-condition indicator. When the camera is on, the
battery-condition indicator appears on the data panel and monitor. The monitor icon will change from
white to red when battery power is low. If the data panel and monitor are blank, the batteries may be
dead or installed incorrectly.