Filter
Top Products
106
Problem Symptom Cause Solution
The camera
will not work.
Nothing dis-
played on the
data panel or
the monitors.
The batteries are dead.
The batteries are inserted
incorrectly.
The AC adapter is not
connected properly.
Replace batteries (p. 16).
Reinsert the batteries taking
care that the negative and pos-
itive terminals are orientated
as indicated on the inside of
the battery chamber door
(p.16).
Check that the adapter is con-
nected to the camera and a
live electrical outlet (p. 18).
TROUBLESHOOTING
This section covers minor problems with basic camera operation. For major problems or damage, or
if a problem continues to reoccur frequently, contact a Minolta service facility listed on the back cover
of this manual.
“Err” displayed
on the data
panel.
The camera is hot or it
has been left in a very
hot environment.
Turn off the camera and allow
it to cool. If “Err” is still dis-
played on the camera after it
cools, remove and replace the
batteries or power cord.
Shutter will
not release.
“000” is dis-
played on the
frame counter.
CompactFlash card is full
and unable to store an
image at the image-quali-
ty or image-size setting
on the camera.
Insert a new CompactFlash
card (p. 18), delete some
images (p. 72), or change the
image-quality or image-size
setting (p. 38, 50).
No-card warn-
ing appears
on the moni-
tors.
No CompactFlash card in
the camera.
Insert a CompactFlash card
(p.18).