Filter
Top Products
45
INSTANT PLAYBACK
QV/delete
button
No
2 sec
10 sec
Menu setting
Instant playback is disabled.
The captured image will be displayed for two or ten seconds. While dis-
played, the image can be deleted before being saved.
: delete : store
Auto
1
2
3
Press the controller to delete the
image.
• The live image will be displayed
on the monitor.
Use the left/right keys of the
controller to highlight “YES.”
• “NO” will cancel the
operation.
To delete an image during the
instant playback, press the
QV/delete button.
• A confirmation screen will appear.
• When using continuous advance
or bracketing, the entire series will
be erased.
After an image is captured, it can be displayed on the monitor before being saved. When in
continuous-advance or bracketing mode, an index display is used (p. 70).
Instant playback is activated with a menu; see “navigating the auto-recording mode menu” section on
page 38. In multi-function recording mode, instant playback is set in the custom 2 section of the
multi-function recording menu (p. 50). When used with voice memo, the audio recording will begin
after the image is played back.
If the center of the controller is pressed during
the instant playback, the displayed image will
immediately be saved and the playback can-
celed.
Controller