Filter
Top Products
92 S
ETUP MENU
LANGUAGE
The language used in the menus can be changed in section 1 of the setup menu. See
page 19 for details.
If file number memory is selected, when a new folder is
created or a new memory card is used, the next image
recorded will have a file number one greater than the last
file saved. If the new card contains an image with a greater
file number, the new image will be assigned a file number
one greater than the greatest on the card. If the file number
memory is disabled, the image file number is reset to 0001
when saved in a new folder or card. File number memory is
activated in section 2 of the setup menu.
FILE NUMBER (#) MEMORY
FOLDER NAME
All recorded images are stored in folders on the memory card. Two folder-
name formats are available in section 2 of the setup menu, standard and
date.
Standard folders have an eight character name. The initial folder is named
100KM029. The first three digits are the folder’s serial number, which will
increase by one each time a new folder is created. The next two letters
refer to Konica Minolta, and the last three numbers indicate the camera
used; 029 indicates a DiMAGE Z6.
A date folder name also starts with the three digit serial number and is
followed by one register for the year, two register for the month, and two
registers for the day: 101YMMDD. The folder 10151219 was created in 2005 on
December 19th.
100KM029
(Standard)
10151219
(Date)
File # memory
Folder name
Date imprint
Off
Std. form
Date/Time set –
Off