Filter
Top Products
102
Using the Set-up Menu (Cont’d)
1
2
3
4
Setting the Operation Sounds
- You can turn on and off the beeps (sounds made for each type of
operation and warnings), the shutter sound, or the sound effects.
- The default setting is turned “ON” (set to sound).
1. Select “SOUND”, press right and
the settings screen appears.
“BEEP” is selected, so press right .
4. Select “SHUTTER” on screen 1 and
then press right. Use up or down to
select “ON” or “OFF”, and then
press right or the MENU/SET but-
ton. The settings are complete and
you return to screen 1.
• If you press left, the setting will be invali-
dated and you will return to screen 1.
3. Returning to screen 1, select
“EFFECT”. Then the screen shown
on the left (screen 3) appears. After
pressing right, use up or down to
select “OFF” or “ON”. Then press
either right or the MENU/SET but-
ton and you will return to screen 1.
• If you press left, the setting is invalidated
and you return to screen 1.
2. Using up or down, select “OFF” or
“ON” and press either right or the
MENU/SET button. You will return
to screen 1.
• If you press left, the setting is invalidated
and you return to screen 1.