Filter
Top Products
If you press left while activating focus lock (pressing the shutter
button half-way on page 34), the focus setting locks and the AF-
lock icon appears on the LCD monitor. The setting remains effective
even after taking a shot.
* To cancel the AF-lock, turn the camera’s power OFF or press the Zoom,
MENU/SET, left, or PLAY button.
You can select the white balance mode by pressing down. Each
time you press down, the mode alters, and the selected mode is
displayed on the LCD monitor. For information on displayed icons
and white balance modes, see page 53.
3) You can engage AF/AE lock function in this feature.
If down button is pressed when taking a photograph, the exposure
correction adjustment bar will be displayed. Exposure can be cor-
rected with right or left button. Press the up button again to make
settings effective. Exposure compensation can be corrected in the
range of ± 0.6 EV in 0.3 EV steps. The compensation setting can be
corrected in the range of ± 1.5 EV by combining with “EXPOSURE”
in the REC menu.
When the compensation setting of REC Menu (p.51) is + 0.9 EV,
you can adjust compensation between + 0.3 EV and + 1.5 EV.
107
Using the Set-up Menu (Cont’d)
Customizing the camera
1) The shooting and flash mode settings (see page 38-39) assigned to
each right or left button can be set to on or off respectively.
* You cannot set all settings to off. If you try to turn all settings to off, the camera
automatically turns “ON” the “AUTO” setting in the flash and shooting modes.
2) You may assign part of the exposure-adjustment to up, and part of
white balance switch function to down.
Setting the exposure compensation to “ON”
Setting the white balance switch function to “ON”
Setting the AF-Lock to “ON”