Filter
Top Products
5
English
5. Selecting Modes
Use the select dial on the side of the camera to select the required shooting mode.
1 Set the main switch on the side of the camera to REC.
The LED indicator will light green after blinking red.
2 Press the select dial. (Figure 3)
“REC MENU” will be displayed on the LCD monitor.
(Figure 4)
3 Turn the select dial to select the required shooting mode
in the REC menu.
4 Press the select dial again.
The shooting mode will be set. (Figure 5)
(Figure 5)
(Figure 4)
PICTURE 640 480
MOVIE
REC MENU
PICTURE 320 240
SETTING
PICTURE 640 480
SELECT
● Shooting modes
● High-resolution mode : PICTURE 640 X 480 [VGA (640 x 480 pixels)]
about 30 images
● Low-resolution mode : PICTURE 320 X 240 [QVGA (320 x 240 pixels)]
about 80 images
● MOVIE : about 10 seconds movie
* In the MOVIE mode, the status LCD shows the number of seconds remaining for taking a movie. You can
take a movie by holding down the shutter button.
Note: The LED indicator will blink red for a few seconds after taking a movie. Do not operate the
main switch while the indicator is blinking to create the movie files securely.
(Figure 3)