Filter
Top Products
2928
1.With subject in the focus frame, press
and hold the shutter release button
partway down.
• The green focus lamp should glow to confirm
the focus is locked.
BASIC OPERATION
2.While pressing the shutter-release
button partway down, recompose the
picture.
3.Press the shutter-release button all the
way down to take the picture.
Because of parallax, the image seen in the
viewfinder and the image recorded with the
camera are not exactly the same. Parallax
becomes significant with close subjects. Use
close-framing guides to eliminate the effect of
parallax.
If the subject is too close, the green focus lamp
blinks rapidly and the shutter is locked. If the
subject is extremely close, the green focus lamp
may blink slowly and the shutter will release, but
the focus will not be sharp.
Close-framing guides
Actual image (shaded area)
FOR CLOSER SUBJECTS