Filter
Top Products
YY MM DD hh mm
4746
FOR OWNERS OF THE QUARTZ-DATE MODEL
SETTING THE DATE OR TIME
Continued on next page.
Note: the date and time must be reset each time the battery is replaced.
1.Turn the camera on. Press the date button
until “SEt” appears on the data panel.
2.Press the select (SEL) button until the item
to be adjusted blinks.
• Each time the select button is pressed, the next item
on the calendar and clock blinks. The sequence is:
The display
stops blinking
ADVANCED OPERATION
3.Press the adjust (ADJ) button or zoom lever
to change the blinking item.
• The numerals continues to change as long as the
button is held down.
• Pressing the W side of the zoom lever counts down,
the T side counts up.
4.Repeat steps 2 and 3 until all items in the
date and time display are correct.
5.Press the date button to set the date and
time.
• The camera will return to the shooting mode
automatically after five seconds. Pressing the date
button again or pressing the shutter-release button
partway down will also return the camera to the
shooting mode.