Filter
Top Products
165mm+-2
122mm+-2
Message Cause Solution
CARD FULL
There is insufficient card
memory capacity to store an
image.
Delete the stored image(s) in the
memory card or insert a new
memory card.
MEMORY FULL
There is insufficient internal
memory capacity to store an
image.
Delete the stored image(s) in the
flash memory.
CARD
LOCKED
(CARD ICON is
BLINKING)
The SD card is locked
Set the SD card protection switch
to non-protection position.
LOCK
The image can't be deleted
while it is protected.
Unlock the protected image.
NO IMAGE
There is no image stored in the
memory card or built-in flash
memory.
FILE ERROR
Delete this image and take the
picture again.
MEMORY ERROR Format the flash memory.
CARD ERROR
Insert a new memory card or
format the card
LOW LIGHT!
The environment is too dark in
"Flash Off" or “Night Scene”
mode.
Set the flash mode to Auto Flash
or Fill-in Flash.
HAND SHAKE ICON
(
)
The environment is too dark in
"Flash Off" or “Night Scene”
mode.
Set the flash mode to Auto Flash
or Fill-in Flash.
LENS COVER The lens cover is closed.
Please open the lens cover
before taking pictures.
62
63
Under Macintosh Operating System (Mac 9.X or later)
Downloading Image(s) From Removable Disk
1. Turn on the PC.
2. Switch on the camera.
3. Connect the camera to the PC with
USB cable under any working mode.
Please make sure the USB cable is
well connected to the PC and camera.
4. When the USB cable is connected to
the PC, it will create a new icon
named "untitled" on the desktop.
5. Double click on the icon.
6. The stored image(s) can be found in
the folder of DCIM \ 100MEDIA \.
7. View any image by double-clicking it.
D ownloading I mage(s) T hrough U leadP hoto E xplorer
1. Connect the camera to the PC with
USB cable under any working mode.
Please make sure the USB cable is
well connected to the PC and camera.
2. Start Ulead Photo Explorer 7.0 SE
Platinum .
3. Click File \Download From Memory
Card to get the stored image(s).
PC Connection
Downloading the Image(s)
Appendix
Error Message Table