Konica Minolta T3 Digital Camera User Manual


 
Depth-of-Field Lever:
The AR series of lens with an AE mark incorporates an
automatic aperture system and therefore the finder is kept
bright with the lens opened to the full degree. When the
Depth-of-Field Lever (5) has been flipped down toward the
lens, the lens will be stopped down to the aperture reading
indicated by the meter needle for AEC and the preset reading
for manual. Look into the finder, and you will be able to
see the depth of field at the given aperture.
Don't release the shutter while the depth-of-field lever is
kept depressed.
Hebel für Schärfentiefe:
Die Hexanon AR Objektive messen die Belichtung bei voll
geöffneter Belnde; dadurch bleibt das Sucherbild hell.
Wenn Sie den Hebelr Schärfentiefe (5) in Richtung
Objektiv drücken, wird das Objektiv auf den Automatisch
gewählten Belndenwert. der von der Belichtungsmesser-
nadel angezeigt wird oder auf den manuell eingestellten
Blendenwert abgeblendet. Dadurch können Sie im Sucher
die Schärfentiefe genau kontrollieren.
Der Auslöser darf nicht betätigt werden, solange der
Hebelr die Schärfentiefe gedrückt ist.
Levier de profondeur de champ:
L'objectif équipé d'une présélection automatique (objectif
de
la
série
AR
avec
le
repère
AE)
est toujours ramené à
l'ouverture maximale. Si l'on désire vérifier la profondeur
de champ tout en regardant dans le viseur, mettre le levier
de profondeur de champ (5) du côté de l'objectif, ce qui
bloque le diaphragme à l'ouverture choisie pour l'opération
manuelle et a l'ouverture indiquée par l'aiguille pour AEC,
Regarder ensuite dans le viseur pour vérifier la profondeur
de champ.
Ne pas déclencher l'obturateur lorsque le levier de
profondeur de champ est actionné.
Bilddjupsarmen:
Objektiven i AR-serien med AE-markering har ett automa-
tiskt bländarsystem och därför är sökaren ljus med objek-
tivet helt öppet.r bilddjupsarmen (5) förts ner mot
objektivet, stänges objektivet mycket som motsvarar
bländarvärdet indikerat av mätarnålenr AEC eller det
tidigare manuellt inställda värdet. I sökaren syns bilddjupet
vid den givna bländaren.
Tryck inte in slutaren medan bilddjupsarmen hålles
intryckt.