Filter
Top Products
in ictures
1. After focusing, turn the shutter speed ring (15) and set the
shutter speed; then adjust the aperture of the lens by turn-
ing the aperture control knob (18). Now the camera is
prepared for taking pictures.
2. Release the shutter by pressing the shutter release button
(7) or (19). When a cable release is used, screw its tip into
the cable release socket in the lower button (19).
3. After each exposure, wind the film by turning the film wind
crank, then follow the same routine as mentioned above.
How to Remove Film
When all film frames have been exposed, the film winding stop
mechanism is automatically released.
Remove the film after
winding the remaining leader paper on the film end.
Winding Up the Roll Film
To remove film before exposing the entire roll, or to wind up
a short roll of film after exposure (6-exposure color films), turn
the film wind crank while depressing the shutter button on the
camera body after winding the exposed frame.
In this manner,
film can be completely wound without stopping.