![](http://pdfasset.owneriq.net/7/58/758c51da-a244-4dfa-9c0a-17610f965c31/758c51da-a244-4dfa-9c0a-17610f965c31-bg114.png)
248
U
Follow the steps below to take photographs in commander mode.
1 Adjust settings for the built-in flash.
Choose the flash control mode and output level for the
built-in flash.
Note that output level can not be adjusted
in –– mode.
2 Adjust settings for group A.
Choose the flash control mode and output level for the
flash units in group A.
3 Adjust settings for group B.
Choose the flash control mode and output level for the
flash units in group B.
4 Select the channel.
5 Press J.