Filter
Top Products
98
t
A
Movie Mode
The ML-L3 shutter-release button functions as the movie-record button
for advanced movie mode (0 59).
A
Using a Flash
When using the built-in flash, press the flash pop-up button to raise the
flash before shooting. Shooting will be interrupted if the flash is raised
while the delayed-remote timer is counting down.
In remote control mode, the flash starts charging while the camera is
waiting for the signal from the remote. The camera will only respond to
the shutter-release button on the remote control when the flash is
charged. If red-eye reduction (0 106) is used when # is selected, the
shutter will be released about one second after the red-eye reduction
lamp lights. If " is selected, there will be about a two second delay
after the shutter-release button on the remote control is pressed; the
red-eye reduction lamp will then light for about one second before the
shutter is released.
A
See Also
For information on choosing how long the camera will wait for a signal
from the remote, see page 213.