Nikon 1 V3 Camcorder User Manual


 
222
n
Power
sources
Rechargeable Li-ion Battery EN-EL20a (0 23–24): Additional
EN-EL20a batteries are available from local retailers and
Nikon-authorized service representatives.
Battery Charger MH-29 (0 23): Recharge EN-EL20a batteries.
Power Connector EP-5C, AC Adapter EH-5b: These accessories can
be used to power the camera for extended periods (EH-5a
and EH-5 AC adapters can also be used). An EP-5C power
connector is required to connect the camera to the EH-5b,
EH-5a, or EH-5; see page 225 for details.
Flash units When mounted on the Nikon 1 V3, the following flash units
support i-TTL and manual flash control (0 187).
Speedlight SB-N5 (0 109):The SB-N5 has a Guide Number of
8.5/27.9 (m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO
160 is 10.8/35.4).
Speedlight SB-N7 (0 109): The SB-N7 has a Guide Number of
18/59 (m/ft, ISO 100, 20 °C/68 °F; Guide Number at ISO 160
is 22.8/74.8).
Remote
controls
Wireless Remote Control ML-L3 (0 96): The ML-L3 uses a 3V
CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).
Micro-
phones
Stereo Microphone ME-1 (0193): Connect the ME-1 to the cam-
era microphone jack to record stereo sound while reducing
the noise caused by lens vibration being recorded during
autofocus.