Nikon 2164+25468 Digital Camera User Manual


 
427
n
White balance
bracketing
2–9 frames in steps of 1, 2, or 3
ADL bracketing 2 frames using selected value for one frame or 3–5
frames using preset values for all frames
Exposure lock Luminosity locked at detected value with A AE-L/AF-L
button
ISO sensitivity
(Recommended
Exposure Index)
ISO 100 – 6400 in steps of
1
/3,
1
/2, or 1 EV.
Can also be
set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 50 equivalent)
below ISO 100 or to approx. 0.3, 0.5, 0.7, 1, or 2 EV (ISO
25600 equivalent) above ISO 6400; auto ISO sensitivity
control available
Active D-Lighting Can be selected from Auto, Extra high, High, Normal,
Low, or Off
Focus
Autofocus Nikon Advanced Multi-CAM 3500FX autofocus sensor
module with TTL phase detection, fine-tuning, 51
focus points (including 15 cross-type sensors; f/8
supported by 11 sensors), and AF-assist illuminator
(range approx. 0.5–3 m/1 ft 8 in.–9 ft 10 in.)
Detection range –2 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo Autofocus (AF): Single-servo AF (AF-S); continuous-servo
AF (AF-C); predictive focus tracking automatically
activated according to subject status
Manual focus (M): Electronic rangefinder can be used
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, 9-, 21-, or 51- point dynamic-area AF,
3D-tracking, auto-area AF
Focus lock Focus can be locked by pressing shutter-release button
halfway (single-servo AF) or by pressing A AE-L/AF-L
button
Exposure