16 Tutorial: “Point-and-Shoot” Photography ( Mode)
3
Frame a photograph in the viewfinder.
4
Focus and shoot.
3.1 Hold the camera as shown.
Holding the Camera
Hold the handgrip in your right hand and cradle the camera
body or lens with your left. Keep your elbows propped lightly
against your torso for support and place one foot half a pace
ahead of the other to keep you upper body stable.
3.2 Frame a photo in the viewfinder with the main subject
positioned in any of the three focus areas.
Focus area
Using a Zoom Lens
Use the zoom ring to zoom in on the subject so that it fills a larger
area of the frame, or zoom out to increase the area visible in the
final photograph (select longer focal lengths to zoom in, shorter
focal lengths to zoom out).
Zoom in
Zoom out
4.1 Press the shutter-release button halfway. The camera will
automatically select the focus area containing the subject
closest to the camera and focus on this subject. If the sub-
ject is dark, the AF-assist illuminator may light to assist the
focus operation and the flash may pop up. The monitor
will turn off.
When the focus operation is complete, the selected focus
area will be highlighted, a beep will sound, and the in-
focus indicator (z) will appear in the viewfinder. The num-
ber of exposures that can be stored in the memory buffer
(“r”; 32) is shown in the viewfinder display while the
shutter-release button is pressed halfway.