Nikon 25468 Digital Camera User Manual


 
111
Z
A Exposure and Flash Bracketing
In continuous low speed and continuous high speed release modes (0 78), shooting will
pause after the number of shots specified in the bracketing program have been taken.
Shooting will resume the next time the shutter-release button is pressed.
In self-timer mode,
the camera will take the number of shots selected in Step 2 on page 109 each time the
shutter-release button is pressed, regardless of the option selected for Custom Setting c3
(Self-timer) > Number of shots (0 214).
In other release modes, one shot will be taken
each time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been taken, shooting can be
resumed from the next shot in the sequence after the memory card has been replaced or
shots have been deleted to make room on the memory card.
If the camera is turned off
before all shots in the sequence have been taken, bracketing will resume from the next shot
in the sequence when the camera is turned on.
A Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture (mode P), aperture
(mode S), or shutter speed (modes A and M).
If auto ISO sensitivity control is enabled in
modes P, S, and A, the camera will automatically vary ISO sensitivity for optimum exposure
when the limits of the camera exposure system are exceeded; in mode M, the camera will first
use auto ISO sensitivity control to bring exposure as close as possible to the optimum and
then bracket this exposure by varying shutter speed.