Filter
Top Products
30
X
A No Memory Card
If no memory card is inserted, the displays in the control panel and at
the bottom of the viewfinder will show S and a “no memory card”
icon will be displayed in the viewfinder screen while the battery has
charge remaining, even when the camera is off.
A Removing Memory Cards
After confirming that the access lamp is off, turn the camera off, open
the memory card slot cover, and press the card in to eject it (q).
The
card can then be removed by hand (w).
A Using Two Memory Cards
Slot 1 is for the main card; the card in slot 2 plays a backup or
secondary role. If the default setting of Overflow is selected for Role
played by card in Slot 2 (0 89) when two memory cards are inserted,
the card in slot 2 will only be used when the card in slot 1 is full.
Slot 1
Slot 2
The control panel shows the slot or slots that currently hold a memory
card (the example at right shows the icons displayed when a card is
inserted in each slot).
If the memory card is full or locked or an error
has occurred, the icon for the affected card will blink (0 307).
Control panel
Information display
4
GB