Filter
Top Products
229
U
Choose the setting or settings affected by bracketing (0 109).
Choose AE & flash
(j) to perform both exposure and flash-level bracketing, AE only (k) to bracket only
exposure, Flash only (l) to perform only flash-level bracketing, WB bracketing (m)
to perform white-balance bracketing (0 112), or ADL bracketing (y) to perform
Active D-Lighting bracketing (0 114).
Note that white balance bracketing is not
available at image quality settings of NEF (RAW) or NEF (RAW) + JPEG.
At the default setting of MTR > under > over (H), exposure, flash, and white balance
bracketing are performed in the order described on pages 109 and 112.
If
Under > MTR > over (I) is selected, shooting will proceed in order from the
lowest to the highest value.
This setting has no effect on ADL bracketing.
Choose what happens when the power switch is rotated to D.
Choose the role played by the J button during shooting: selecting the center focus
point (J Select center focus point), highlighting the active focus point
(K Highlight active focus point), or none (Not used).
e5: Auto Bracketing Set
G button ➜ ACustom Settings menu
e6: Bracketing Order
G button ➜ ACustom Settings menu
f: Controls
f1: D Switch
G button ➜ ACustom Settings menu
Option Description
D
LCD backlight (D) Control panel backlight illuminates for 6 s.
0
D and information display
Control panel backlight illuminates and shooting information is
displayed in monitor.
f2: OK Button (Shooting Mode)
G button ➜ ACustom Settings menu