Nikon 25474 Digital Camera User Manual


 
302
n
Shooting (P, S, A, M)
Shutter-release disabled:
Non-CPU lens is attached: rotate camera mode dial to A or M (0 270).
Mode dial rotated to S after shutter speed of A selected in mode M: choose new shutter
speed (0 69).
Camera is slow to respond to shutter-release button: Select Off for Custom Setting d11 (Exposure
delay mode; 0 219).
Full range of shutter speeds not available:
Flash in use.
Flash sync speed can be selected using Custom Setting e1 (Flash sync speed);
when using optional SB-900, SB-800, SB-700, SB-600, or SB-R200 flash unit, choose 1/320 s
(Auto FP) or 1/250 s (Auto FP) for full range of shutter speeds (0 222).
When On is selected for Movie options > Manual movie settings in the shooting menu,
shutter speed can be set to values between
1
/8000 s and
1
/30 s (0 60).
Colors are unnatural:
Adjust white balance to match light source (0 117).
Adjust Set Picture Control settings (0 131).
Can not measure white balance: Subject is too dark or too bright (0 125).
Image can not be selected as source for preset white balance: Image was not created with D7000
(0 126).
White balance bracketing unavailable:
NEF (RAW) or NEF+JPEG image quality option selected for image quality (0 85).
Multiple exposure mode is in effect (0 154).
Effects of Picture Control differ from image to image: A (auto) is selected for sharpening, contrast, or
saturation.
For consistent results over a series of photos, choose another setting (0 134).
Metering can not be changed: Autoexposure lock is in effect (0 106).
Exposure compensation can not be used: Choose mode P, S, or A (0 68, 69, 70).
Noise (reddish areas or other artifacts) appears in long time-exposures: Enable long exposure noise
reduction (0 205).