Nikon 25474 Digital Camera User Manual


 
77
k
k
Release Mode
To choose a release mode, press the release mode dial
lock release and turn the release mode dial to the
desired setting.
Choosing a Release Mode
Mode Description
S
Single frame: Camera takes one photograph each time shutter-release button is pressed.
CL
Continuous low speed: While shutter-release button is held down, camera records 1–5
frames per second.
1
Frame rate can be chosen using Custom Setting d6 (CL mode
shooting speed, 0 217).
CH
Continuous high speed: While shutter-release button is held down, camera records up to 6
frames per second.
2
J
Quiet shutter-release: As for single frame, except that mirror does not click back into place
while shutter-release button is fully pressed, allowing user to control timing of click
made by mirror, which is also quieter than in single frame mode.
In addition, beep
does not sound regardless of setting selected for Custom Setting d1 (Beep; 0 215).
E
Self-timer: Use self-timer for self-portraits or to reduce blurring caused by camera shake
(0 80).
4
Remote control: Shutter is controlled using shutter-release button on optional ML-L3
remote control (0 80).
MUP
Mirror up: Choose this mode to minimize camera shake in telephoto or close-up
photography or in other situations in which the slightest camera movement can result
in blurred photographs (0 83).
1 Average frame rate with an EN-EL15 battery, continuous-servo AF, manual or shutter-priority
auto exposure, a shutter speed of
1
/250 s or faster, remaining settings other than Custom
Setting d6 at default values, and memory remaining in memory buffer.
2 Average frame rate with an EN-EL15 battery, continuous-servo AF, manual or shutter-priority
auto exposure, a shutter speed of
1
/250 s or faster, other settings at default values, and
memory remaining in memory buffer.
Release mode dial