Filter
Top Products
72
Recording and Playing Back Movies
B Notes About Vibration Reduction During Movie Recording
• When Movie VR in the movie menu (A74) is set to On (hybrid), the angle of view (i.e., the area
visible in the frame) becomes narrower during movie recording.
• In special effects mode, only lens shift VR is used to compensate for camera shake when Movie
options is set to Z 1080/60i (U 1080/50i), even if Movie VR is set to On (hybrid).
• When using a tripod to stabilize the camera during shooting, set Movie VR to Off to prevent
potential errors caused by this function.
B Notes About Camera Temperature
• The camera may become hot when shooting movies for an extended period of time or when the
camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the camera will
automatically stop recording.
The amount of time remaining until the camera stops recording (B10s) is displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
B Notes About Autofocus for Movie Recording
Autofocus may not perform as expected (A64). Should this occur, try the following:
1. Set Autofocus mode in the movie menu to Single AF (default setting) before starting movie
recording.
2. Frame another subject (positioned at the same distance from the camera as the intended subject)
in the center of the frame, press the b (e movie-record) button to start recording, and modify
the composition.