Filter
Top Products
118
Using Menus
Altitude/depth Options
B Notes About Altitude/Depth Options
• To correct the altitude or water depth using Use location data of Alt./depth
correction, Record location data in Location data options in the location data
options menu must be set to On, and also positioning must have been performed
based on signals received from four or more satellites (A132).
• When Altimeter/depth gauge is set to On, the altimeter or depth gauge, altitude
or water depth, and the atmospheric pressure are displayed even if Hide info is
selected for Photo info in Monitor settings in the setup menu (A78).
Press the d button M z (location data options) menu icon M
Altitude/depth options M k button
Option Description
Altimeter/depth
gauge
Set whether or not to display the altimeter or depth gauge
on the shooting screen.
• Default setting: On
Alt./depth correction
The altitude or water depth value is compensated.
• Use location data: The altitude is compensated using
the record location data function.
- When the confirmation dialog is displayed, select
Yes and press the k button. The altitude is
compensated using the displayed value.
- The data is not compensated underwater.
• Correct manually: Enter the altitude or water depth to
compensate the data.
- Use the multi selector HI to change the value and
use JK to change the input position of the digits.
- When the cursor is positioned on the rightmost digit,
press the k button to set this value.
• Reset: The compensation set using Use location data
or Correct manually is canceled.
- When the compensation cancellation dialog is
displayed, select Yes and press the k button. The
compensated value is canceled.
Altitude/depth units
Set the unit of distance for displaying altitude or water
depth to m (meters) (default setting) or ft (feet).