Filter
Top Products
F7
Technical Notes and Index
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Display, Settings and Power Supply
Problem Cause/Solution A
Battery inserted into the
camera cannot be charged.
• Confirm all connections.
• Off is selected for Charge by computer in
the setup menu.
• When charging by connecting the camera to
a computer, battery charging stops when
the camera is turned off.
• When charging by connecting the camera to
a computer, battery charging stops if the
computer is suspended (sleeping), and the
camera may turn off.
• Depending upon computer specifications,
settings, and status, it may be impossible to
charge the battery inserted into the camera
via computer connection.
16
88, E62
88, E62
88, E62
–
The camera cannot be
turned on.
• Battery is exhausted.
• When connecting to an electrical outlet
using a Charging AC Adapter, the camera
cannot be turned on.
20
16
The camera turns off
without warning.
• Battery is exhausted.
• The camera automatically turns off to save
power if no operations are performed for an
extended period of time.
• The camera and battery may not work
properly at low temperatures.
• The camera turns off if the Charging AC
Adapter is connected while the camera is on.
• The USB cable connecting the camera to the
computer or printer has been disconnected.
Reconnect the USB cable.
• The internal temperature of the camera or
the memory card is high. Leave the camera
off until it has cooled and then turn it on
again.
20
21, E59
F4
16
72, E19
–