Nikon 26495 Digital Camera User Manual


 
75
Using ViewNX 2
Playback Features
Transferring Images to the Computer
1 Choose how images will be copied to the computer.
Choose one of the following methods:
Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the supplied USB
Cable UC-E6. The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the
memory card from the camera before connecting it to the computer.
SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
When using Windows 7
If the dialog shown at right is
displayed, follow the steps
below to select
Nikon Transfer 2.
1 Under Import pictures and
videos, click Change
program. A program
selection dialog will be
displayed; select Import File using Nikon Transfer 2 and click OK.
2Double-click Import File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.