Nikon 26495 Digital Camera User Manual


 
46
Scene Mode (Shooting Suited to Scenes)
Shooting Features
O Pet portrait
Use this mode for taking portraits of pets (dogs or cats). When
the camera detects the face of a dog or cat, it focuses on the
face and automatically releases the shutter (pet portrait auto
release).
On the screen displayed when O Pet portrait is selected for
scene mode, select Single or Continuous.
- Single: The camera takes one image at a time.
- Continuous (default setting): When focus is acquired on the detected face, 3 images
can be captured (Continuous shooting speed: about 1.2 fps when the image mode
setting is P 4603456). F icon is displayed in the monitor during shooting when
Continuous is selected.
A double border (focus area) is displayed around the
detected face, and it turns green when the focus is acquired.
Up to five faces can be detected. When the camera detects
more than one face, the double border is displayed around
the largest face, and single borders are displayed around the
others.
When no pet faces are detected, the shutter can be released
by pressing the shutter-release button.
- The camera focuses on the subject at the center of the
frame when no pet faces are detected.
- When Continuous is selected, up to 6 images are captured at a rate of about 1.3 fps
while the shutter-release button is held down (when the image mode setting is P
4603456).
Press the multi selector J (n) to change auto release settings.
- Pet portrait auto release (default setting): The camera automatically releases the
shutter when it focuses on the detected face. While Pet portrait auto release is
selected, the d icon is displayed in the shooting screen.
- OFF: The shutter is released only when the shutter-release button is pressed.
Digital zoom is not available.
Factors such as the distance between the pet and the camera, the orientation or
brightness of the face, and the speed at which the pet is moving may prevent the camera
from detecting the faces of dogs or cats or may cause the camera to display borders
around faces other than those of dogs or cats.
Pet portrait auto release turns off automatically when:
- Five bursts have been taken.
- Internal memory or the memory card is full.
To continue taking pictures with Pet portrait auto release, press the multi selector
J(n) and change the setting again.
95 0
950
8m 0 s
8m 0s