Nikon COOLPIX5900 Digital Camera User Manual


 
11
First Steps
Replacing Batteries
Turn the camera off and make sure that the Power-on Lamp
has gone out before opening the Battery-chamber Cover.
Slide the Battery Latch in the direction indicated to eject the
battery, which can then be removed using your fingers.
Note that the battery may become hot during use. Observe due cau-
tion when removing the battery.
CP1
Your camera also uses a non-rechargeable CP1 lithium
batteries (×1).
Make sure the orientation and the positive/negative ter-
minals are correct, and then insert the battery in the
same way as EN-EL5.
Alternative Power Sources
To power the camera continuously for extended periods, use an optional EH-62A AC
adapter. Do not, under any circumstances, use another make or model of AC
adapter kit. Failure to observe this precaution could result in overheating or in damage
to the camera.
For more information on attaching instructions for EH-62A AC adapter kit, see “Con-
necting the EH-62A AC Adapter Kit” ( 137).
3
Close the Battery-chamber Cover
Close the cover ( ) and slide it in until it
latches ( ).
Ensure the cover is closed firmly.
Terminals