Filter
Top Products
132
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
Q
Turn the camera off,
remove the lens cap,
and turn the camera
on.
The lens cap may be
attached, or a lens error has
occurred.
Make sure that the lens cap
has been removed, then
turn the camera on again. If
the error persists even after
the camera is turned off and
then on again, contact
retailer or Nikon-authorized
service representative.
15
O (blinks) Clock not set. Set clock. 106
N
Battery exhausted.
Battery exhausted. Replace the batteries.
14, 123
Q (blinks red) Camera cannot focus. • Refocus.
• Use focus lock.
24, 25,
50
P
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
saving is complete.
Wait until message clears
from display automatically
when saving is complete.
25
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch to
“write” position.
19
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
130
18
18
P
This card cannot be
read.
P
Card is not formatted.
Format card?
Yes
No
Memory card has not been
formatted for use in
COOLPIX L120.
All data saved on the
memory card will be
deleted. If there is any data
on the card that you want
to keep, select No, and
backup the data to a
computer before
formatting the memory
card. To format the memory
card, select Yes and press
the k button.
19